The Tower-Upgrade offers the ability to operate our photobooth-ready with a larger printer. It works with Citizen OP900II, Mitsubishi CP 9810 DW and Sinfonia S2145 (recommended). The base is also made of powder coated aluminum and has 4 swiveling feet in brushed stainless steel. It fits seamlessly into the design of the Photobooth and upgrades the Photobooth to a terminal or Tower. It is equipped with a pull-out for the printer allows a fast paper change. The door is lockable of course. The tripod-mount must not be removed at the photo box. The Tower-Upgrade is completely wired and has in addition to a USB and power cable to the printer and a 5m power cord.
-
Sale!
With our Photo Booth – Ready, we offer a sophisticated complete System which has been reinforced in many cases in Practice. The Photobooth is designed to rent it per Shipping, too. Therefore, it is very sturdy yet light. Our Aim is to give you an Photobooth wich is capable to meet all customer requests right from the Start and have no Restrictions. Whether it’s the optional Thermal-Printer or our functional, but simple Software that allows our Photobooth to be prepared for each case. The sophisticated Aluminum Case combines all technical Components safely, in a small Space and weighs only 22Kg including the complete Technique (without Printer). The scratch and impact resistant Powder-Coating withstand even rough Use and gives the Photobox an high Quality Optic. It also fits in a small Car and can be easily installed by one Person. The Start-up takes less than 10 minutes.
S2145-Printer only fits to Tower-Upgrade
CS2-Printer only with Tripod!
DNP DS620-Printer only with Tripod!
-
Softcase for Photo Booth Ready with padding. The bag has an all-around zipper and 2 risers. In addition, the protective case is equipped with a transparent window for documents. There are openings for the handles and tripod-mount of the box. Material and Finish: • Airtex with foam. • bag fully padded with 10mm foam • two lateral waist belt 40 mm black, cross sewn • 2 zip rotating • Outside: padded slip pocket A5 with clear window for documents -
Big Buzzer to additionally trigger your Photobooth remotely. The mandatory Buzzer has become the symbol of the Photobooth. The Photo Booth buzzer is connected to a USB port and can be programmed with any key combination. The wireless version dispatches a "Page UP" signal and has been tested with DSLR-Booth Pro. In addition, the cordless model has a status LED battery charging to check (2x AAA). Cable length: 2m
-
Sale!Out of stock
- 31 different props for fun photos
- Great for photo booths at special events
- Moustaches, spectacles etc.
- Bring some fun to your parties
Note: The sticks come separately, and will need to be glued to the props.
-
Out of stock
Model No. CHC-S2145-5 Print Method Dye Sublimation Thermal Transfer Resolution 300 dpi Paper Size Capacity 700 prints : 152 mm x 102 mm (6" x 4") 355 prints : 152 mm x 203 mm (6" x 8") 310 prints : 152 mm x 229 mm (6" x 9") 790 prints : 127 mm x 89 mm (5" x 3.5") 400 prints : 127 mm x 178 mm (5" x 7") Print Speed Approx. 9 seconds / 152 mm x 102 mm (6" x 4") sheet print Ink Ribbon / Paper YMC+OP / Roll Paper Dimensions 296(W) x 342(H) x 416(D) mm Weight 20kg / 44 lb Power Supply AC100-240V 50 / 60 Hz Power Consumption 2.6A-5.2A Interface USB 2.0 Buffer Memory 32MB Safety Standards UL, cUL, CE EMI FCC ClassA, VCCI ClassA RoHS Comply Printer Driver Windows 2000 / XP / Vista / 7(32bit), Plug in DLL Compatible with Tower-Upgrade for Photobooth-Ready 1.1
-
Model No. CHC-S6145 Print Method Dye Sublimation Thermal Transfer Resolution 300dpi Paper Size Capacity 300 prints : 102mm x 152mm (4" x 6") 170 prints : 127mm x 178mm (5" x 7") 150 prints : 152mm x 203mm (6" x 8") Multiple print (6" x 4") x 2 with 6" x 8" Print Speed 11 seconds : 102mm x 152mm (4" x 6") 17 seconds : 127mm x 178mm (5" x 7") 19 seconds : 152mm x 203mm (6" x 8") Ink Ribbon / Paper YMC+OP / Roll Paper Dimensions 272(W) x 168(H) x 351(D) mm Weight 10Kg or less Power Supply AC100-240V, 50 / 60Hz Auto-switching Power Consumption 3.1A- 1.3A Interface USB 2.0 Buffer Memory 32MB Safety Standards UL, cUL, CE EMI FCC ClassA, VCCI ClassA Printer Driver Windows XP / Vista / 7 (32bit, 64bit)/ 8 (32bit, 64bit), Plug in DLL Compatible to Photobooth-Ready 1.1
-
- DNP DS Series Dye Sub Professional Photo Printer - Power Cord - 4x6" Print Catcher - 5x7" Spacer - Driver Disk - Setup Guide
- Resolution: 300 x 300 dpi
- Print Size: 4"x 6", 5"x 7", 6"x 8"
- Print Speed: 8.3 sec/print (4"x 6") 14.1 sec/print (5"x 7") 15.7 sec/print (6"x 8")
- Paper: 400 sheets/roll (4"x 6") 230 sheets/roll (5"x 7") 200 sheets/roll (6"x 8")
-
Mediakit for 800 Prints in 4x6" or 400 Prints in 6x8". -
Photobooth-Natty offers stylish appearance and cutting edge technology, all of it packed into one small product. It is a sophisticated product, with a lot of attention to the smallest details and it impresses with a high-end finish. We have used Aluminium in all parts except the pedestal to make it as light as possible. The pedestal is manufactured from steel.
The Touchscreen and PC is a Surface Pro Tablet. It also comprises a state-of-the-art DSLR-Camera to offer best image quality. Lighting is done by two built-in TTL-flashes. Using the TTL-Function, Photobooth is able to regulate the ideal flash intensity automatically, no matter if it is used in sunshine or absolute darkness. The robust connector system of the pedestal enables the Photobooth to be deployed in two different height setups to accomodate sitting or standing customers or even kids. Additionaly, the camera can be tilted. To be independent from batteries, we have also incorporated an accu pack for the TTL-flashes. This can be connected to the main power and can act as an energy buffer. Photobooth can operate 4 to 5 hours without external power without problems. You can select wether to order Photobooth completely assembled or just the technical components. This way you can save some money. For that you can use the links below, to guarantee that you order the right components. Additionaly, you can select between multiple colours for the frame as well as a transparency film in wood appearance. Photobooth offers no room for a printer, but there will be a separate printer kiosk that will fit optically to the Photobooth. -
Sale!
Our Kiosk system in "Natty-Style" offers space for a Printer and an IPad. It can be used as an optically suitable printer housing in addition to the Photobooth-Natty, as well as stand-alone kiosk. In order to be able to print over the IPad, there is enough space for an Intel Nuc mini PC. The housing is completely made of aluminum. The base is made of steel sheet. All parts are coated with a powder coating. For easy transport, the kiosk system can be divided into 3 parts. The printer is inserted on the back and is secured with a lockable flap. The following printers are compatible:
- DNP DS40
- DNP DS620
- SINFONIA CS2 S6145
-
Photobooth-Natty offers stylish appearance and cutting edge technology, all of it packed into one small product. It is a sophisticated product, with a lot of attention to the smallest details and it impresses with a high-end finish. We have used Aluminium in all parts except the pedestal to make it as light as possible. The pedestal is manufactured from steel.
The Touchscreen and PC is a Surface Pro Tablet. It also comprises a state-of-the-art DSLR-Camera to offer best image quality. Lighting is done by two built-in TTL-flashes. Using the TTL-Function, Photobooth is able to regulate the ideal flash intensity automatically, no matter if it is used in sunshine or absolute darkness. The robust connector system of the pedestal enables the Photobooth to be deployed in two different height setups to accomodate sitting or standing customers or even kids. Additionaly, the camera can be tilted. To be independent from batteries, we have also incorporated an accu pack for the TTL-flashes. This can be connected to the main power and can act as an energy buffer. Photobooth can operate 4 to 5 hours without external power without problems. You can select wether to order Photobooth completely assembled or just the technical components. This way you can save some money. For that you can use the links below, to guarantee that you order the right components. Additionaly, you can select between multiple colours for the frame as well as a transparency film in wood appearance. Photobooth offers no room for a printer, but there will be a separate printer kiosk that will fit optically to the Photobooth. -
Photobooth-Natty offers stylish appearance and cutting edge technology, all of it packed into one small product. It is a sophisticated product, with a lot of attention to the smallest details and it impresses with a high-end finish. We have used Aluminium in all parts except the pedestal to make it as light as possible. The pedestal is manufactured from steel. The Touchscreen and PC is a Surface Pro Tablet. It also comprises a state-of-the-art DSLR-Camera to offer best image quality. Lighting is done by two built-in TTL-flashes. Using the TTL-Function, Photobooth is able to regulate the ideal flash intensity automatically, no matter if it is used in sunshine or absolute darkness. The robust connector system of the pedestal enables the Photobooth to be deployed in two different height setups to accomodate sitting or standing customers or even kids. Additionaly, the camera can be tilted. To be independent from batteries, we have also incorporated an accu pack for the TTL-flashes. This can be connected to the main power and can act as an energy buffer. Photobooth can operate 4 to 5 hours without external power without problems. -
The new Photobooth Profy represents the top model of our systems. In this Photo Booth, we have put all our know-how and implemented everything that is technically feasible. This photo box is especially interesting because of the large advertising space for business customers and hotels. The illuminated lower part of the user's attention can be additionally directed to the advertising campaign. The large touchscreen makes the user experience very pleasant. Similarly, a powerful Intel I5 Windows 10 PC and a Jinbei studio flash with LED permanent light is installed. All components are protected in the housing. A freely programmable LED ring around the lens directs the eyes of the users at the right time on the camera. The delivery time for desired colors is about 20 working days. -
LED-Ring um die Nutzer während des Countdowns auf das Objektiv zu lenken. Wer kennt es nicht, die Nutzer schauen auf den Fotos auf den Monitor statt in die Kamera. Mit dem LED-Ring werden die Blicke der Gäste nun während des Countdowns auf die Kamera gelenkt. Features:- 32 RGB-LEDs
- Durchmesser des LED-Rings innen 90mm ind außen 104mm
- Durchmesser der Edelstahl-Abdeckung innen 80mm und außen 130mm
- inkl. USB-Controller und Download-Software
- kompatibel mit:
- DSLR-Booth
- Breeze
- Social Booth
- Darkroom-Booth
- Spark-Booth
- Right-Booth 6
- 54 vorinstallierte Funktionen
- Farbwahl für jede Funktion über GUI-Palette
- LED-Helligkeit und Geschwindigkeit einstellbar
- LED-Ring
- USB-Controller
- USB-Kabel
- Edelstahl-Abdeckung gebürstet (optional)
-
Transportcase Set zur Photobooth-Profy bestehend aus 2 Cases. Profi Truhencase Fotobox Profy / A- in Farbe schwarz
- Unterteilt in Oberteil-1/3 und Unterteil 2/3
- Fach für Kabel und Zubehör je nach übrigem Platz
- 9mm Birke farbig beschichtet,
- 30/30 Alukante,
- 4x Butterfly mittel,
- 10x Klappgriff mittel,
- 8x Kugelecke groß,
- 4x Lenkrolle (2xgebremst),
- Innenausbau,
- Schaumstoffpolsterung,
- hergestellt in Deutschland / AI
- Maße 1125 x 560 x 710mm
- in Farbe schwarz
- Haube,
- 7mm Birke farbig beschichtet
- 30/30 Alukante,
- 4x Butterfly mittel,
- 4x Klappgriff mittel,
- 8x Kugelecke medium,
- 4x Lenkrolle (2xgebremst),
- Innenausbau,
- Schaumstoffpolsterung,
- hergestellt in Deutschland / AI
-
Maße 720 x 470 x 580mm
-
Matching stand for our Photobooth buzzer. Height without Buzzer 85cm Diameter foot 40cm white powder coated in structure 2x lettering "Photobooth" in the foot made of steel Buzzer not included
